Sintering Archives - 麻豆国产精品 /tech-downloads-category/sintering/ Quality Vacuum Heat Treating, Brazing, Carburizing, and Nitriding Wed, 27 Nov 2024 13:17:10 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 /uploads/2024/07/sol-favicon-298x300.png Sintering Archives - 麻豆国产精品 /tech-downloads-category/sintering/ 32 32 Austempering at Conventional Sintering Temperatures /tech-downloads/austempering-at-conventional-sintering-temperatures/ Wed, 17 Jun 2015 16:40:21 +0000 /?post_type=pt_tech_downloads&p=5758 A paper published in 2004 described the advantages of austempering after a high temperature sintering process. One disadvantage is the increased cost involved with high temperature sinter cycles. This paper describes the tensile properties that result from sintering at a conventional sinter temperature (1120掳C) and austempering according to the cycle describe in a previous paper. The properties that are obtained are compared with the properties that result from high temperature sinter and austemper cycle.

The post Austempering at Conventional Sintering Temperatures appeared first on 麻豆国产精品.

]]> A paper published in 2004 described the advantages of austempering after a high temperature sintering process. 聽One disadvantage is the increased cost involved with high temperature sinter cycles. 聽This paper describes the tensile properties that result from sintering at a conventional sinter temperature (1120掳C) and austempering according to the cycle describe in a previous paper. 聽The properties that are obtained are compared with the properties that result from high temperature sinter and austemper cycle.

 

Authors: Kenneth H. Moyer, Magna-Tech P/M Labs

William R. Jones, CEO, 麻豆国产精品, Inc.
William R. Jones, CEO, 麻豆国产精品, Inc.

 

 

 

 

 

 

 

Originally Published: 2005

 

Download Austempering at Conventional Sintering Temperatures Paper

The post Austempering at Conventional Sintering Temperatures appeared first on 麻豆国产精品.

]]> Vacuum Sintering-A Way to Improve Ductility and Toughness of Structural P/M Parts at the Right Price /tech-downloads/vacuum-sintering-a-way-to-improve-ductility-and-toughness-of-structural-pm-parts-at-the-right-price/ Wed, 17 Jun 2015 16:41:50 +0000 /?post_type=pt_tech_downloads&p=5764 Most parts fabricators do not understand the importance of a quality sinter to provide improved ductility and toughness for tomorrow鈥檚 markets. As a result, the potential for growth markets for quality parts has seldom been exploited. Today the main emphasis is still on cost reduction, rather than quality.

The post Vacuum Sintering-A Way to Improve Ductility and Toughness of Structural P/M Parts at the Right Price appeared first on 麻豆国产精品.

]]> Most parts fabricators do not understand the importance of a quality sinter to provide improved ductility and toughness for tomorrow鈥檚 markets. 聽As a result, the potential for growth markets for quality parts has seldom been exploited. 聽Today the main emphasis is still on cost reduction, rather than quality.

 

础耻迟丑辞谤蝉:听Kenneth H. Moyer, Magna-Tech P/M Labs, Ronald D. Payne, Sinteris PM Corporation

William R. Jones, CEO, 麻豆国产精品, Inc.
William R. Jones, CEO, 麻豆国产精品, Inc.

 

 

 

 

 

 

 

 

Download: Vacuum Sintering-A Way to Improve Ductility and Toughness of Structural P/M Parts at the Right Price

The post Vacuum Sintering-A Way to Improve Ductility and Toughness of Structural P/M Parts at the Right Price appeared first on 麻豆国产精品.

]]>